Description
Replacement Clockwork for George Nelson Reproduction Wall Clock
Tested with model Asterisk Clock, Block Clock, Sunburst Clock and Ball Clock.
May also work for other, we can gladly compare sizes. For normal weight clock hands.
One unit is for 1 clockwork, 1 rubber washer, 1 clockwork slut screw
Clock hands not included
Required battery (not included): 1 x 1,5 Volt (Mignon, AA, LR6)
Unfortunately we have no further spare parts for Nelson clocks.
It may be required to re-use old parts to re-attach the clock hands.
How to replace Clockwork
1. Loosen the small knurled nut on top of the clock hands and unscrew it.
2. Then you can remove the hour hand.
3. The minute hand then can be pulled upwards, it is only clamped on with a bushing.
4. To loosen the clockwork usual a special screwdriver is needed, which you can buy here ++click++
5. Change clockwork and do all reverse.
If you are skilled you also can use a small slot screw driver. Put it into the slot and tap very gently with the hammer counter clockwise.
Please make sure the old rubber washer does not stick inside the clock housing, otherwise the clockwork slot screw is not long enough!
