Description
Not sure, what to buy?
Inch or metric, both will work, but to keep your chair original, select the correct thread.
READ THIS ++LINK++
The length designation describes the length of the screws.
Length depends on which base you use:
12mm | 1/2″ for H-Base | Eiffel Base | Dowel Base | Rocker Base
16mm | 5/8″ for Tandem Bench | Office Chair base with Casters
18mm | 3/4″ for LaFonda Base
The diameter of all shock mounts offered here is 45mm.
Select what you need:
1. All you need repair set – metric thread for all in Europe (e.g. Weil am Rhein) produced, except some very early
2. Shock Mounts only – metric thread for all in Europe (e.g. Weil am Rhein) produced, except some very early
3. All you need repair set – 1/2″ inch thread for H-Base | Eiffel Base | Dowel Base | Rocker Base. Fits all Herman Miller produced, also some early produced in Europe, (e.g. Weil am Rhein).
4. All you need repair set – 3/4″ inch thread for LaFonda Base. Fits all Herman Miller produced, also some early produced in Europe, (e.g. Weil am Rhein).
5. Shock Mounts only – 1/2″ inch thread for H-Base | Eiffel Base | Dowel Base. Fits all Herman Miller produced, also some early produced in Europe, (e.g. Weil am Rhein).
6. Shock Mounts only – 3/4″ inch thread for LaFonda Base. Fits all Herman Miller produced, also some early produced in Europe, (e.g. Weil am Rhein).
If you need additional glue, please follow this link and select Rubber | Fiberglass
The only Original Reproduction Worldwide!
Eames Shock Mount Replacement Repair Kit “All you need”!
All Shock Mount sets are professional made from elastic Neoprene Rubber, like the Original Herman Miller!
Not made of Polyurethane!!
A well known issue of vintage Eames Side- and Armchairs are broken Shock Mounts, which are used to mount the bases to the fibreglass shells of the chairs. The rubber dried out and material lost flexibility.
Here you find all you need for professional repair of your worn shock mounts.
Please note the video instruction below!
Fits for models DCM, LAR, DAF, DAX, DSX, DAR, PSC, DSW, RAR.
Each Kit including:
4 shock mounts (round 45mm (1 3/4″), thick 12mm (1/2″) | metric OR inch thread)
+ Set 1+2 = 8 metric screws: 4pc 12mm or 1/2″ Screws for H-Base | Eiffel Base | Dowel Base | Rocker Base and 4pc 16mm or 3/4″ Screws for LaFonda Base
+ Set 3-6 = select 4 inch screws: 1/2″ (12mm) Screws for H-Base | Eiffel Base | Dowel Base OR 4 inch screws 3/4″ (16mm) for LaFonda Base
All you need repair set (Set 1., 3. + 4.) additional include
+ 1 adhesive (24ml | enough for mounting 8 shock mounts) We recommend to buy additional an Mixing Tube Nozzle for convenient uniformly mixed amounts of each component!
+ 2 sachet of color agent for coloring adhesive (black & ivory)
+ 2 piece of sandpaper 120
+ 1 pair of gloves
+ 1 mixing stick for mixing the adhesive
Regarding color agent:
Please note, the very small amount of pigments may look a bit stingy, but it is intentional to only ship this amount because if there is too much pigment, the glue will not stick properly. It is just a visual thing to simulate the original glue and has nothing to do with the function of the glue. Please shake the pigments into a corner, it is enough to color the glue, or if you accept transparent glue, just leave it out.
Please read: Hints on 2-compound glue ++click++
Please degrease all parts with Acetone (NOT nail polish remover!). Do not use alcohol, thinner or similar! Professional gluing is degreased with acetone!
This shock mounts also work for George Nelson DAF Swag Leg Chair.
DON’T BUY CHEAP POLYURETHANE REPRODUCTION!
Yes, there are some cheaper on the web, but they are garage made DIY Polyurethane production. Polyurethane is a 2-compound material, nearly non elastic. It is used e.g. in car industry for chassis bushings. Original is elastic neoprene with custom made insert. See the comparison below!
Polyurethane fake shock mounts like others sell
Gestellbefestigung, Gummipuffer, Gummischeiben, Gestellhalter, rubber disk, base fixture
